METROL TOUCH SENSOR SELECTION

METROL- Touch Sensor
•High precision MT-Touch sensors •CS-Touch sensors •Stopper bolt with built-in sensors •Stopper Mini with built-in sensors •Ball plunger with built-in sensors •Spring plunger with built-in sensors •Mini-Pulser •Aero Absorber

METROL - High -accuracy MT Touch Sensors
# Repeatability of 0.5 Microns Without an Amplifier # IP-67 Protective Structure Result In Compatibility With Adverse Environments Using Water , Oil and Coolant # High Relaible Contact type #Both Contact and Contact Less Type are available

METROL-CS Touch Sensor
# 10 Micron Repeatability Without an Amplifier # Compact Size for High Economically Efficiency # High Cost Performance # Compact Design # Highly Reliable Touch type # Stable Output of highly accurate position signal # Both Contact and Contact- less

METROL - Stopper Bolt With Build-in Sensor
# Two Job with single device realizes a reduction in machine size by reducing the number of part Contact life span is 10 million time , stopper with sensor . # Reduced Maintenance Costs # Both Contact and Contact-less Type are available. # Reduce

METROL - Stopper Mini With Build-In Sensor
# Diameter 8 x 8 size for space savong installation. # Mini sensor with stopper featuring excellent durability # Rugged design and highly durability contact life span able withstand more than 10 million times.

METROL-Ball Plunger With Built-In Sensor
# Ball Plunger with Buit-in actuating signal output sensor # Simplicity of designing and quite useful for reduced part costs # assisiting reduced equipment size # contact type and contact less type are available.

METROL - Spring Plunger With Built-In Sensor
# Spring Ball Plunger with Buit-in actuating signal output sensor # Simplicity of designing and quite useful for reduced part costs # assisiting reduced equipment size # contact type and contact less type are available.

METROL- CS-Touch Sensor R- Series
# CSR-Touch Sensor are lever-type touch sensor provide with a rotating shaft supported by two ball bearings having a long life span # A wide range of option can be selected from the lever contact shape , stroke ( angle ) and other parameter to match the

METROL-CS Touch Sensors CS Series
# These sensor contain two built-in sensors without using a logic circuit ( Sequencer ) for discriminating between - -NG , OK , +NG and enable the signal to be output directly with a two wire cable for extremely low costs. # Adjustable OK range # Failsa

METROL - Mini-Pulser
** Best Suitable for Low-Cost Automation ** # Compact, lightweight and low-Priced # No Amplifier is required # Numerical Values Can be read # Adaptable to adverse environments ( IP-67 ). # Improvements in Efficiency , Labour saving & automation of

METROL - Aero Absorbers ( Vacuum + Pneumatic Shock Absorber)
** World First Vacuum + Pneumatic Shock Absorber ( With Sensor ) # Suitable for use in Semioconductor , Food and Pharmaceutical Production Processes that do not permit the leakage of oil - Also useful for HACCP & ISO 14001 # Prevents Problem with P

Metrol Touch sensors Website
Product information Position detecting, Discrimination of dimensions Contact-type high-accuracy position sensors

METROL - High-accuracy MT-Touch Sensor - P series
High-accuracy MT-Touch Sensor , 0.5 micron in repetitive accuracy !! MT Contact type sensors are not affected by materials and shapes of detected objects

METROL -Ultra-small size PT-Touch Sensor - PT Series
Ultra-small size PT-Touch Sensor " The World's Smallest !! " M5 / φ5 ,Entire length 17mm & 1 micron in repetitive accuracy without an amplifier with 3 million Contact life time.

METROL -CS-Touch Sensor - CS Series
CS-Touch Sensor , Compact design !! (M5～) , 5 micron in repetitive accuracy & Eliminate costly intermediate actuators and design the machine compact.

METROL -Rotating lever type CSR - CSR series
Rotating lever type CSR - Rotating lever type !! , Sliding touch type , Low contact force & Rotating lever CS-Touch Sensor provided with a rotating shaft sustained by 2 ball bearings The finely adjustable contacts enable accurate and easy signal setting

METROL -Stopper Bolt with a Built-in Switch -ST series
Stopper Bolt with a Built-in Switch - 2 tasks with 1 device !! , Housing a high-accuracy built-in switch in a stopper bolt & The built-in switch is cartridge type. Maintenance cost is greatly reduced by applying cartridge type & When replacing the sens

METROL -Stopper Mini with a Built-in Switch-STM series
Stopper Mini with a Built-in Switch - φ8×8(the smallest) Ministopper with a built-in switch !! , Friction-less plate spring is applied to this product & Mini sensor with a hardened stopper surface. Best suited to demanding application and equipment

METROL -High-accuracy MT-Touch Sensor - BP series
High-accuracy MT-Touch Sensor - 2 tasks with 1 device !! -Housing a high-accuracy built-in switch in a ball plunger.Housing a high-accuracy built-in switch in a ball plunger Can be used for indexing and positioning of a rotating object, and confirmation

METROL -Stopper Bolt with a Built-in Switch -SP series
Stopper Bolt with a Built-in Switch - 2 tasks with 1 device !! -Housing a high-accuracy built-in switch in a spring plunger.Housing a high-accuracy built-in switch in a spring plunger The stroke length is relatively long and the contact force is high. S

METROL - Ultra Precision Position Switch- Catalogue Request
Product range: High-accuracy MT-Touch Sensor, ultra small size PT-Touch Sensor, CS-Touch Sensor, CS-Touch Sensor / Rotating lever type, CS-Touch Sensor / 2-class discrimination type, Stopper Bolt with a Built-in Switch, Stopper Mini with a Built-in Switch

METROL Toolsetter -Dustproof waterproof enhanced sensor
The sharp, small chip being mixed in the cutting lubricants, it scatters, under bad environment of cutting actual place and the like with the sensor of standard specification, it is not possible possibly to correspond. The pioneer of the edge sensor fo

METROL Toolsetter- Edge sensor for CNC lathe
The edge sensor for the CNC lathe is used for the position detection of the byte edge. When it applies the edge to the contact and pushes, on→OFF touch signal whose repeatability is good is output by CNC and PC, edge position is automatically written

METROL Toolsetter- Edge sensor for CNC machining

Installing in the CNC machine tool of machining center, the milling machine, the boring board and the drilling machine etc, precise position detection of edge such as drill, end mill and cutter (pre-setting), it is used for wearing, breaking and inspectin

METROL Tool-setter compatible model
*This product is compatible with the D5F type of OMRON *Metrol supplies CNC sensors to the CNC Builder in the same manner as OMRON series.

METROL Tool-setters For CNC Machine tools Catalogue
Product range: Tool setters for CNC lathes , Tool setters for CNC machining centers , Work sensors for CNC Machine tool & Drill Bit Breakage Detection Sensor

Metrol- Toolsetters - Product Range
Product range: Tool setters for CNC lathes , Tool setters for CNC machining centers , Work sensors for CNC Machine tool & Drill Bit Breakage Detection Sensor

Metrol Toolsetter You Tube
The edge sensor for the CNC lathe is used for the position detection of the byte edge. When it applies the edge to the contact and pushes, on→OFF touch signal whose repeatability is good is output by CNC and PC, edge position is automatically writte

Metrol Sensor Website

Product information Position detecting, Discrimination of dimensions Contact-type high-accuracy position sensors

Please Log on: http://www.advfit.com/p_detail.asp?Id=437